Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 8.501 SLD 3
INTELLIGENT LIGHTWEIGHT DESIGN OFFERS AN OPTIMIZED MOUNTING CONCEPT
- More power in the hook due to Single Link
- Maximum reliability due to PALTRONIC
- Shorter load cycle times due to High Speed Extension
- Maximum utilisation of the working range due to HPSC
Max. lifting moment | 8.1 |
Max. lifting capacity | 5700 |
Max. hydraulic outreach | 11.8 |
Max. manual outreach | 15.8 |
Slewing angle | 400° |
Slewing torque | 1.0 |
Stabilizer spread (std) | 3.2 m |
Fitting space required (std) | 0.72 |
Width folded | 2.32 |
Max. operating pressure | 330 |
Pump capacity | 25 - 35 l/min |
Dead weight (std.) | 1050 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment | Outreach | Slewing angle | Slewing torque (mt) | Pressure | Pump capacity (l/min) | Crane Weight | Crane Height | Crane Width | Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Std | 8.1 mt | 5.6 m | 400 | 1.0 | 33.0 Mpa | 25-35 | 1050 kg | 2005 mm | 2300 mm | 720 mm | 5400 mm | - | 1500 kg |
A | 7.8 mt | 7.6 m | 400 | 1.0 | 33.0 Mpa | 25-35 | 1140 kg | 2005 mm | 2300 mm | 720 mm | 7400 mm | - | 1020 kg |
B | 7.6 mt | 9.7 m | 400 | 1.0 | 33.0 Mpa | 25-35 | 1240 kg | 2005 mm | 2300 mm | 720 mm | 9600 mm | - | 720 kg |
C | 7.4 mt | 11.8 m | 400 | 1.0 | 33.0 Mpa | 25-35 | 1320 kg | 2005 mm | 2300 mm | 720 mm | 11700 mm | - | 500 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.